Home >> Products >> Resistors

image Series Features Description catalog Specification RoHS REACH Part No. Application
Wire Wound, Resistors,Flameproof(Small Type) KNP-S Wire Wound, Resistors,Flameproof(Small Type) Application Guide
ROP Cement Resistors,Cylindrical Type ROP ROP Cement Resistors,Cylindrical Type Application Guide
SQ Cement Resistors SQ SQ Cement Resistors Application Guide
CR Series chip resistors (0201) CR General thick film resistors(0201) CR(0201) Application Guide
Power Metal Film Chip  Resistors SMF Power Metal Film Chip Resistors SMF Application Guide
Power Wire Wound Chip Resistors SMW Power Wire Wound Chip Resistors SMW Application Guide
CP Chip Resistor CP High power Chip Resistors CP Chip Resistor Application Guide
Metal Oxide Film Resistor,flameproof /Metal Oxide Film Resistor,flameproof (Small Type) RSN&RSS Metal Oxide Film Resistor,flameproof /Metal Oxide Film Resistor,flameproof (Small Type) Application Guide
RT Metal Glaze High Voltage Resistors RT RT Metal Glaze High Voltage Resistors Application Guide
CR Series  thick chip Resistor 0402~1206 CR General thick film resistors CR(0402~1206) Application Guide
CL chip Resistor CL Thick Film Low Ohm Chip Resistors Application Guide
CR Series  thick chip Resistor 1210 CR General thick film resistors(1210) CR(1210) Application Guide

Wire Precision Resistor is wirewound resistors that are designed to have a very precise and stable resistance value. These types of resistors are used in applications where a high degree of accuracy is required, such as in measurement and testing equipment, precision instrumentation, and control systems.

To achieve a high level of precision, precision wirewound resistors are typically made with high-quality resistive wire and carefully wound to precise tolerances. They may also be made with more advanced winding techniques, such as helical winding or multi-layer winding, to improve stability and reduce temperature coefficient.

In addition to their precise resistance value, wire precision resistor may also have other features that improve their performance, such as a low temperature coefficient, a high power rating, and a low inductance. These characteristics make them well-suited for use in a wide range of applications.

Wire Precision Resistor Construction:

Wirewound resistor construction varies widely. The fabrication method and material selection depend on how the resistor will be used in the circuit. All of these are made by wrapping wire around an iron core. The resistance value depends on the resistivity, cross-section and length of the wire. Since these parameters can be precisely controlled, high precision resistors can be obtained. For high tolerance requirements, measure the resistance value to accurately determine the length of the cutting line. To produce high resistance, the wire diameter needs to be very small and very long. Therefore, wirewound resistors are mainly produced for lower resistance values. For low power ratings, use very thin wire. Handling of very thin wires is critical. Any damage could cut the wire. After winding,

There are also wirewound resistors rated up to 50 W or more. The construction of these resistors is completely different. Compared to other resistor types such as metal film, the wire diameter is relatively larger and therefore stronger. We offer over 20 different series of wirewound constructions. Selection can be made according to installation, application and resistance range. They all have good stability and resistance range, and come in a variety of wattage specifications.

Read More